ROBALON®-Z
PE-UHMW | PE 1000 | Polyethylene
Gray. Reinforced molybdenum disulfide alloy, extremely low-friction. Used for bearing bushings and linings requiring a strongly clinging and adhering material with a high relative moisture.
| Operating temperature | -200°C to +80°C, +100°C for short periods |
| Long-term pressure load | 2 N / mm² |
| Density | 0.93 g / cm³ |
Material properties
- Suitable for use in temperatures below 0°C
- UV and weather resistant
- High chemical resistance
- Cost-effective standard plastic
- Low adhesion
- Extremely low-friction
- High wear resistance
- High wear resistance
- Resistant to low temperatures
- Hydrolysis resistance
- Very high impact strength
- Tension-free internal structure
- High resistance to formation of stress cracks
- No splits or breaks
- Noise-attenuating
Brochure ROBALON plastics GERMAN (2,2 MB)