ROBATEC® PA 6G
PA 6G | cast polyamide
Characteristics: More low-stress than extruded PA 6, better tensile and compression strength than extruded PA 6, better mechanical machinability than extruded PA 6, good adhesive properties, good weldability, impact-resistant, energy-elastic, shock and vibration reducing, good weather resistance, high dynamic energy absorption capacity, excellent resistance to bases, poor resistance to acids, limited resistance to solvents, high level of moisture absorption for increased impact resistance, low density, ability to withstand high mechanical stresses, little distortion under mechanical loads, high surface hardness
Excellent resistance to hydrocarbons, alkalis, grease, oil, fuels, ethers, esters, ketones
No resistance to halogens, mineral acids and certain organic acids, oxidants
Typical applications: Gears, rollers, cable rollers
PA 6G is a universal material – wherever there are no special requirements
Properties
- Suitable for use in temperatures below 0°C
- Suitable for contact with food
- High chemical resistance
- High impact strength
- Good adherence characteristics
- Good weldability
- Cost-effective standard plastic
- High Shore hardness
- Low adhesion
- Little sliding wear
- High wear resistance
- High level of stability
- High level of rigidity
- High creep strength
ROBATEC® PA 6G natural
Semi-crystalline thermoplast | Technical plastic
Polyamide 6G is the standard material used for many applications, including
- Rollers
- Wheels
- Bushings
ROBATEC® PA 6G black
Semi-crystalline thermoplast | Technical plastic
Compared with standard types:
- black, therefore UV stabilized
ROBATEC® PA 6G OL yellow
Semi-crystalline thermoplast | Technical plastic
Compared with standard types:
- Yellow
- Reduced fire protection characteristics
- Limited suitability for foodstuffs
- Improved sliding behavior
- Improved wear characteristics
- Poorer adherence characteristics
ROBATEC® PA 6G OL black
Semi-crystalline thermoplast | Technical plastic
Compared with standard types:
- Black
- Reduced fire protection characteristics
- Limited suitability for foodstuffs
- Improved sliding behavior
- Improved wear characteristics
- Poorer adherence characteristics
ROBATEC® PA 6G GLIDE
Semi-crystalline thermoplast | Technical plastic
Compared with standard types:
- Improved sliding behavior
- Improved wear characteristics
ROBATEC® PA 6G GLIDE PLUS
Semi-crystalline thermoplast | Technical plastic
Compared with standard types:
- Improved dimensional accuracy
- Higher mechanical capacity
- Higher rigidity
- Greater hardness
- Lower impact resistance
ROBATEC® PA 6G HS
Semi-crystalline thermoplast | Technical plastic
Compared with standard types:
- Limited suitability for foodstuffs
ROBATEC® PA 6G ESD 90
Semi-crystalline thermoplast | Technical plastic
Compared with standard types:
- Limited suitability for foodstuffs
- ESD suitability
ROBATEC® PA 6G LU
ROBATEC® PA 6G GK
Semi-crystalline thermoplast | Technical plastic
Compared with standard types:
- Increased thermostability
- More brittle
