Select language:

CRU-type slide rails for round link chains in accordance with DIN 766 and DIN 764

CRU-type slide rails for round link chains in accordance with DIN 766 and DIN 764
CRU-type slide rails for round link chains in accordance with DIN 766 and DIN 764

Slide profiles made from ROBALON and ROBATEC materials to provide a guide for round link chains and offer wear-reducing and maintenance-free operation for drives and conveyors.

  • Low coefficient of friction – low power consumption saves energy
  • Self-lubricating – no need to apply oil
  • High wear resistance
  • Offers chain protection – increases the service life of the chains
  • High level of resistance to acids, bases, and organic solvents
  • Quiet operation
  • Shock and breakproof from -200°C to +80°C
  • Hydrolysis resistance
  • Easy to clean – ROBALON has dirt-repelling characteristics
  • UV-resistant (ROBALON-S, ROBALON-E, ROBALON-GL)
  • Food-safe (ROBALON-W)

 

 

Inquire about product

 

 

LERIPA
type no.		 Chain designation C profile no. B H d h2
CRU 6 6 C9 45 45 7 8
CRU 8 8 C9 50 50 9 9.5
CRU 10 10 C9 50 60 11 14

Please note: The steel profiles are not included in the scope of delivery.

Please state in your inquiry or order whether you require C rails or not. C profile dimensions

  

Robalon plastic guides have a high thermal expansion coefficient; this means that steel C profiles are often used so that the guides have the optimum conditions for expansion within the C profile.

As a rule, thermal expansion of 1.8 mm per 10-degree temperature difference for every 1 m of length must be assumed with Robalon.

In the event of excessive temperature fluctuations, we recommend increasing the number of expansion joints and a design that is at a 45° angle to the running direction.

 

The maximum length of the chain guides is 12 m.

For small orders we recommend shorter lengths of 2 to 3 m to keep transport costs down.

Standard chain guides can be found in our PDF brochure. We can also produce bespoke guide profiles on request; our profile milling machines use up to 9 tools simultaneously for efficient and economical production of 1 to 1,000 rm profiles. Simply send us a drawing of your personal requirements in PDF or DWG format.