Application

At machine speeds of up to approx. 600 m/min

Supply range

• Forming board trailing blade / forming board covers
• Forming board trailing blades
• Hydrofoils
• Vacufoils
• Suction box covers
• Felt suction strips

Manufacture

All materials are produced through lengthy sinter pressing processes with extremely long press cycles.
This enables us to produce covers up to 12 m long with no welding seams and also ensures a tension-free
internal structure compared with the typical standard sinter press process and extrusion.

Assembly

PE dewatering elements have a high level of thermal expansion. They must therefore be installed in such a way that enables the strips or covers to expand without restriction (T-bars, corner strips, dovetail guides, screws in elongated holes). The base frame support must have a grid of approx. 250 mm to ensure flawless functionality for our covers. This support must extend to the underside of the cover to ensure it has a flat installation surface. 

Product comparison

	Max. machine speed	ø coefficient of friction [u]	Service life	Investment	Surface quality	Efficiency increase
			low→high	costly→ cost-effec.	low→high
ROBADUR	up to 600 m/min	0.17				Best price-performance ratio
ROBADUR-MUF	up to 600 m/min	0.18				White plastic
ROBALIT 61	up to 600 m/min	0.16				Optimized function: surface
ROBAGLAS	up to 800 m/min	0.18				Optimized function: wear resistance

Tested on the Röchling LERIPA Papertech wear simulation machine.

Settings: 600 m/min, wet section with 15% filler content, 1.5 kN/m wire tension